Filter collector FS
€168.00
- Filters the rainwater in the downpipe
- Housing and filter insert made of stainless steel
- Easy to retrofit
- Extremely low maintenance, as self-cleaning
- For up to 150 m² roof area (in temperate climate regions).
Available, delivery time: 2-5 days
Note:
Please contact our partner Rainwater Management Solutions (RMS) for a distribution to the USA:
Mail: RMS contact form
Website: www.rainwatermanagement.com
Phone: +01 (540) 375-6750
The rainwater filter is ideal for installation in rainwater downpipes made of metal or plastic. It consists of a housing top, housing pot and filter insert. The housing is optionally available in stainless steel (VA) or copper (CU), while the filter insert in all versions is made of stainless steel and has a mesh size of the filter fabric of 0.28 mm.
Maintenance is simple and low-maintenance, cleaning in a dishwasher is recommended 2-3 times a year. The outlet connection to the rainwater storage tank has a diameter of DN 50. In addition, the rainwater filter complies with the drainage standards DIN EN 12056 / EN 752 and meets the requirements of DIN 1989.
The payment is uncomplicated in our store! You can find detailed info about payment and shipping here. We offer the following payment methods:
Worldwide shipping
FREE SHIPPING WITHIN GERMANY FOR ORDERS OVER €50.
Once your order has been placed, you will receive a confirmation email informing you that our shipping team has received your order. Once your order has been processed, you will receive an email notification with your tracking information. Shipping costs will not be refunded in the event of a return. We ship with:
The filter collector for the rainwater downpipe
The FS filter collector filters the rainwater directly in the downpipe while it is still being drained to the side of the cistern. Its filter insert is made of fine stainless steel mesh with a mesh size of just 0.28 mm. This reliably separates leaves, moss and other debris and flushes it down into the receiving water.
Use of the FS filter collector
The FS filter collector filters rainwater from up to 150 m² of roof surface (projected onto the level). It is then optimally prepared for storage in the rainwater storage tank and can be used in the garden, toilet or washing machine.
Stainless steel or copper are available for visual harmonisation with the downpipe.
Capacity of the filter collector FS
The flow through the filter collector can be up to 4.2 l/s, corresponding to the capacity of the downpipe.
As in all WISY filters, the open cross-section is maintained throughout. There are no constrictions where rainwater can accumulate. Not even in the case of cloudburst-like rainfall with heavy dirt input.
Safe drainage according to DIN EN 12056 / EN 752 is always guaranteed, DIN 1989 is fulfilled.
At the same time, the filter has a high hydraulic efficiency. As soon as the filter fabric is wetted with water, at an inflow of one litre per second, about 0.98 litres per second are filtered and directed to the rainwater storage tank.
Flow rate
Up to 4.2 l/s flow through the filter collector FS
Safe drainage
Compliance with DIN EN 12056 / EN 752 and DIN 1989
Low-maintenance and -friendly
All WISY filter inserts are designed to be particularly low-maintenance. Their smooth stainless steel surface makes it almost impossible for impurities to adhere.
As the filter insert is above floor level, it is easily accessible and protected against backwater in the sewer system. If necessary, it can be removed from the housing in a few easy steps and cleaned with a high-pressure cleaner or in a dishwasher.
Simple installation
The FS filter collector can be installed in the downpipe easily and without much effort. A section of the downpipe is cut out according to the instructions and the filter can be inserted directly.
The FS filter collector sits precisely on the lower section of the downpipe so that no further fastening is required and installation is completed in just a few minutes. The filter collector is then immediately ready for use and ensures efficient rainwater utilisation.
Article number
| For metal downpipes | Nominal width Da = outer Ø downpipe | Mesh size 0.28 mm |
|---|---|---|
| FS 100 VA | (DN) 100, Da 102 mm | FS 0303 |
| FS 87 VA | (DN) 87, Da 89 mm | FS 0302 |
| FS 80 VA | (DN) 80, Da 80 mm | FS 0301 |
| FS 76 VA | (DN) 76, Da 76 mm | FS 0305 |
| Copper housing | ||
| FS 100 CU | (DN) 100, Da 102 mm | FS 0203 |
| FS 87 CU | (DN) 87, Da 89 mm | FS 0202 |
| FS 80 CU | (DN) 80, Da 80 mm | FS 0201 |
| FS 76 CU | (DN) 76, Da 76 mm | FS 0205 |
| For plastic downpipes | ||
| Stainless steel housing | ||
| FS 110 VA | (DN) 100, Da 110 mm | FS 0304 |
| FS 76 VA | (DN) 70, Da 75 mm | FS 0305 |
| Copper housing | ||
| FS 110 VA | (DN) 100, Da 110 mm | FS 0204 |
| FS 76 VA | (DN) 70, Da 75 mm | FS 0205 |