Filter Collector FS

  • Downpipe Filter for Rainwater
  • Made of stainless steel
  • Roof areas up to 150 m² or 1,615 sq.ft.
    (temperate climate zone)
buy online
Fallrohrfilter Edelstahl


Filter Collector FS for the downpipe

The Filter Collector FS filters runoff rainwater from the roof just before discharging it to the storage tank.

Its filter insert is made of a fine stainless-steel mesh with a mesh size of only 0.28 mm.

Leaves, moss and other debris entrained in the rainwater are reliably filtered out and flushed away through the downpipe to the soakaway or drain.

Usage of the Filter Collector FS

The Filter Collector FS filters rainwater from up to 150 m² (1,600 sq.ft.) of roof area (projected onto the plane, in temperate climate zones).

Rainwater cleansed by this rainwater filter is in a perfect condition for tank storage and for subsequent use in the garden, for flushing toilets or for the washing machine.

Filtersammler Kupfer

The housing is available in stainless steel or copper so that it can be visually harmonised with the existing downpipe.

Filtering capacity of Filter Collector FS

The maximum flow rate through the filter collector is 4.2 litres per second (depending on the capacity of the downpipe).

As with all WISY filters, the cross-sectional area for rainwater flow does not change at any point inside the filter, i.e. to ensure the free flow of water, the cross section is not restricted at any point. There is no risk of blockage even during torrential rainfall events which may flush large quantities of debris into the filter.

The filter collector meets the requirements defined by EN 12056 / EN 752 and also conforms to DIN 1989.

The hydraulic efficiency of the filter is excellent. As soon as the filter mesh is wetted with water, around 0.98 out of one litre per second are filtered and fed to the rainwater storage tank.

Easy to maintain — low-maintenance design

All WISY filter inserts are designed for very low maintenance. It is virtually impossible for debris or dirt to stick to their smooth, stainless-steel surface. As a result, the filter inserts have a long service life.

The filter insert is easily accessible and protected against backflow in the sewer system. When necessary, the insert can be removed from the housing in just a few simple steps for cleaning by a high-pressure cleaner or in the dishwasher.

Filtersammler Zeichnung

Item number

For metall downpipes Da = external-Ø downpipe Mesh Size 0.28 mm
Stainless steel housing
FS 100 VA (DN) 100, Da 102 mm FS 0303
FS 87 VA (DN) 87, Da 89 mm FS 0302
FS 80 VA (DN) 80, Da 80 mm FS 0301
FS 76 VA (DN) 76, Da 76 mm FS 0305
Copper housing
FS 100 CU (DN) 100, Da 102 mm FS 0203
FS 87 CU (DN) 87, Da 89 mm FS 0202
FS 80 CU (DN) 80, Da 80 mm FS 0201
FS 76 CU (DN) 76, Da 76 mm FS 0205
For plastic downpipes
Stainless steel housing
FS 110 VA (DN) 100, Da 110 mm FS 0304
FS 76 VA (DN) 70, Da 75 mm FS 0305
Copper housing
FS 110 VA (DN) 100, Da 110 mm FS 0204
FS 76 VA (DN) 70, Da 75 mm FS 0205