-
1¼“, für Behälterverschraubung 15808
-
- Brass ball valve
- Lever of aluminium
-
- Blind insert made of stainless steel
-
- waterproof cable coupling
-
- 3 m flexible pressure hose 1“, cistern
- PE tube connector, 90°, 32 mm x 1“ nozzle, made of brass, cistern
- 4 stainless steel hose clamps
- PE tube connector, 90°, 32 mm x 1“ inside thread, made of brass, utility room
- Connecting hose (1“) with stainless-steel braiding, 1” nipple, 1” union nut, connection wall unit
- To be provided on site: PE pipe 32 mm x 1“ from Cistern to utility room
-
- Universal cistern cover with storage compartment underneath
- Tidy garden
- Watering hose always at hand
- Integrated child safety lock
- Suitable for all common concrete cisterns with 60 - 63 cm manhole
-
- Auslaufhahn für die Regentonne
- Anschlussweite ¹/₂" oder ³/₄"
-
- Extension of the standard lifting handle
- 50 cm (1.6 ft.) or 100 cm (3.3 ft.) length
-
- To raise inspection opening to ground level
-
- Extension tube for raising inspection opening to ground level
- Diameter 70 cm (2.3 ft.)
- Length optional up to max. 140 cm (4.6 ft.)
-
- Filtering inserts for the rainwater filters LineAr 100 K and LineAr 100 VA
- Mesh Size 0,44mm
-
-
- Flexible Leitung speziell für Kabelverbindungssets, nach Wunsch ablängbar, pro Meter.
-
- For fast, easy and inexpensive installation
- 25 m (82 ft.) or 50 m (164 ft.) roll
- Connecting parts to DN 50 and DN 100
-
-
For fast, easy and inexpensive installation.
-
All parts are connectable.
-
Flexible tube (PE) with flexible draw cord.
- Outside diameter 50 mm (1.97 in)
- Inside diameter 40 mm (1.57 in)
-
-
- Switch lever and retaining clamp (for pipe diameter of 110 – 130 mm / 4 – 5 in.) made of stainless steel. Float housing (red), butt-spliced, made of polypropylene.
- With switch lever for precise definition of switching points, with 4 cm (1.6 in.) switching cycle.
-
- Switch lever and retaining clamp (for pipe diameter of 110 mm – 130 mm / 4 in – 5 in) made of stainless steel
- Float housing (yellow), butt-spliced, made of polypropylene
- Flexible connecting cable 3 x 1 mm2
-
-
- clamp width 12 mm (0.5 in)
-
Hose connection set for Maxima, comprising connection hose 0.50 m (1.6 ft.), 1“ union nut, ¾” brass ball valve with inside thread
-
- The hose connection set for OPTIMA / SIGMA / MULTIMAT / SIGURA 9 is consisting of two pressure hose assemblies (3/4“ and 1“), each 0.5 m (1.6 ft.) in length, 3/4“ ball valve with dirt trap and 1“ ball valve.
-
- Hose coupling
- For connection of two hoses
-
- Double-ended hose coupling made from stainless steel
- Each end 1“
-
- Stainless steel
- Non-return valve
-
- Material: PVC-Compound
- free of pores and smooth; abrasion-resistant, weatherproof, ozone-resistant, resistant to ageing
- Max. temperature resistance from -25°C to + 60°C. Max. vacuum -0.8 bar. Maximum pressure 12 bar
-
- Intermediate / adapter plug for connection of float switch control cable.
-
- Required to connect the extension tube
- For WFF 300 / storage tank / soakaway system
-
- Label for utility room
- Toilet label
- Label for extraction points
- Rainwater label
- Underground pipework tape
-
- Universal pneumatic fill level meter
- Integrated mechanical pump
- Wall-mounted unit made of shock and impact-resistand plastic
- Basic equipment includes 20 m plastic measurement, extendable up to 50 m
- Fill level indicated in % irrespective of tank shape
-
- Measuring lead extension for level indicator
- 10 m
-
- PE tube connectors, made of brass.
- To connect PE tube to hose.
-
- Brass connections
- Flat sealing
- TÜV-approved
-
- Rainwater barrel connecting hose, 1¼“.
- Connects RainCatcher or RainCollector to a rainwater barrel
- UV-resistant plastic spiral hose,
- Including tension ring.
-
- For the connection of two rainwater barrels
-
- Delayed release of rainwater into the storm drain
- Retention Regulator with float valve
- High degree of functional safety thanks to coarse filter
- Flexible special hose with steel spiral
- Continuous flow rate, choosable from 58 to 3,780 litres per hour
-
- 1 Floating fine suction filter SAFF with non-return valve
- 10 m flexible suction hose
- 2 stainless steel hose clamps
- 1 hose connector
-
- To combine the Vortex Fine Filter with a soakaway system
- Stainless-steel
- Hole size: 3.0 mm (0.12 in)
-
- Stainless-steel retaining clamp
- for DN 100 pipe
-
- Stainless-steel support bracket for horizontal installation of submersible pumps in storage tanks, e.g. ribbed plastic cisterns.
-
- For precise control of the float switch
- Universal fit
- Defines switching points precisely
-
- Stainless steel standpipe clamp
- Secure attachment of the Standpipe Filter Collector to the wall
- With hanger bolt and wall plug
-
- High-flexibility suction hose in pre-cut lengths for pumping water.
- Made of polyurethane (PU) with integral steel spiral.
- Maximum vacuum -0.8 bar (-11.6 psi).
- Both ends with push-fit connection to fit 1” hose nozzles (DN 25).
-
- two brass tank bushings
- 2 m (6.5 ft) flexible tube DN 40
-
-
- 5 mm - 16 mm (0.2 in - 0.6 in)
- for KG-Pipe DN 100
-
- For industrial applications
- Designed for continuous duty
- No additional water consumption, filtered water is used in cleaning process
-
- Dichtet Leitungen an Durchführungsstellen ab
- Besteht aus einer 30 mm starken Gummischeibe mit zwei Edelstahlplatten und -verschraubungen
- Mit integrierter Elektrokabeldichtung
- Nur gegen „nicht drückendes“ Wasser einsetzbar
-
- For secure installation of the filter on the outside of a concrete-cistern
- Stainless steel
-
- Stainless-steel wall-mounting bracket
-
- Wall mounting bracket WFF100/150
- for installation on a vertical wall
